| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Vehicle Exterior | Section: Lighting (ext) | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000001DKQ00VX |
| Title: LIGHTING (EXT): STOP LIGHT SWITCH: INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. INSTALL STOP LIGHT SWITCH ASSEMBLY
(a) Install the stop light switch into the adjuster until it slightly touches the brake pedal.
NOTICE:
Do not depress the brake pedal.
|
(1) Make a quarter turn clockwise to install the stop light switch. NOTICE:
Do not depress the brake pedal. HINT:
Do not tighten the stop light switch more than the torque specification. Torque: 1.5 N·m (15 kgf·cm, 13 in·lbf) |
(b) Check the stop light switch clearance.
Stop light switch clearance:
0.5 to 2.6 mm (0.020 to 0.102 in.)
(c) Connect the stop light switch connector to the stop light switch.
|
|